Nigel my InMoov Robot
Nigel my InMoov Robot
The InMoov robot project is by created by Gael Langevin, a french sculptor and designer. Please visit Gaels web page for how to build this fantastic robot. The website has full instructions on how to download and 3D print all the parts required and can be found here:
Gael Langevins Website: http://inmoov.fr/
These blog pages contain photographs and descriptions of how I built my own InMoov, the 3D printers I use and the things I have learned along the way. Please also look at my YouTube and GitHub feeds. Please Subscribe and Comment, its nice to talk to everybody!
This blog is structured in to Information Pages and Blog pages
Please subscribe and leave comments
The Blog Pages are ongoing dated pages with latest news, photographs and so forth, here
Information Pages contain detailed information about my InMoov and its build parts. These pages are separated in to the following sections
Information Pages contain detailed information about my InMoov and its build parts. These pages are separated in to the following sections
InMoov Control System here
This page contains details of the control hardware and software and also wiring schematics.
InMoov Bill of Materials [BOM] here
The current list of hardware I have used for the project. Also links to sites where you can buy some of the items. I am not affiliated to the supplier sites and do not benefit from them.
My 3D Printers and Software here
General discussion as per its title!
Revisions and Updates Information here
I am a planning to regularly update the pages and correct any errors, so will comment about changes here. Check here to see if the wiring schematics on the site have been updated for example.
Comments
Post a Comment