Let me know

Is there any feature I should add? Add a comment on my new Chat Page

InMoov Bill Of Materials [BOM]

BOM for the robot build.
This list is work in progress and maybe incomplete.

I have included web links for all the items on the list but they are only suggested places.
It really pays to search out the best pricing on many of these items - in particular the SERVOS.

For example, I have bought the Hitec servos from several different suppliers and the prices have varied a lot, depending on availability.    Check the model variation with the EZ-B hardware - shop around as you can get slightly older models much cheaper.   Also look for the kits that are often on sale.

Also check out the official InMoov BOM here:  http://inmoov.fr/default-hardware-map/
I am not affiliated to any supplier and do not benefit from them.   These are only suggestions!

Download here: BOM_Download and note that the download may be more up to date.
Here is my list [double click to enlarge]....




Comments

  1. Unknown14 February 2019 at 18:57

    Hello
    I buidling the InMoov too but yours is awesome with EZ-B Parts. Can you tell me how much EZ-B´s i needed?
    In your BOM List is not listed how many Parts i needed.
    Ribbon Cable, Servos and so on.
    Thanks

    Greets
    Bernd

    ReplyDelete
    Replies
    1. kyle campbell27 February 2019 at 18:27

      Hello Bernd
      I have used two EZB controllers. My InMoov has the same number of servos are Gaels original and he lists them on his site. I do not have an exact list of quantities of all the parts I have used as the project just evolved. I just bought the parts on my BOM and added more as I needed them. Originally I controlled it with Arduinos and MRL software but found that too unreliable [its much improved now]. I can send you a copy of the EZB software file that controls my InMoov if you would like it? Send me your email address and I email it back to you. Kyle

      Delete
    2. Unknown6 April 2019 at 20:55

      Hello
      Many Thanks, Yes send me please the EZB File.

      Bernd

      Delete
    3. Youshaa Al-Ali21 April 2019 at 19:55

      hello
      can you send the ezb software file?
      My E-mail: yshaaali@gmail.com
      thank you Kyle

      Delete
  2. Unknown10 March 2019 at 15:16

    Hello Kyle
    Yes great, send me EZB File Please to bernd79@gmx.de
    Thanks

    Greets
    Bernd

    ReplyDelete
    Replies
    1. kyle campbell9 May 2019 at 12:14

      Hi Bernd, just sent a copy, sorry about the delay!

      Delete
  3. Unknown2 April 2019 at 20:19

    Hello

    Awesome.
    Yes send me please the EZB Software.
    bernd79@gmx.de
    Many Thanks.

    Greets
    Bernd

    ReplyDelete
  4. KaptainK_CG10 May 2019 at 19:25

    I'm so happy to see you are using the EZ-B! I'm currently printing out my InMoov, and was thinking of using the EZ-B, but wasn't sure if it had the processing power needed?
    I'm -very- interested in your EZB file as well, if possible!
    kaptainkcg@gmail.com
    Thanks!

    ReplyDelete
  5. Unknown8 March 2020 at 14:57

    I am also trying to use EZ-B now. The parts are already in the printing process. I think EZ-B is very suitable for InMoov. Can you share me your program if it is convenient?
    qq847733618@gmail.com
    thank you very much. Forgive me for my bad English.

    ReplyDelete
  6. Unknown20 April 2020 at 06:25

    hi what are the advantages of using the ez-b over the arduino?

    ReplyDelete
    Replies
    1. kyle campbell20 April 2020 at 23:13

      Hello, its really a personal preference. When I tried out the Arduino and MRL [my robot lab] it was early in its development and I had a lot of reliability issues, plus their was little documentation. Things have really improved with the MRL so download it and try out the software. I must have another go at it myself. The EZB system is a fully commercial approach and very well documented and supported. It just worked out of the box for me. The software is free so again try it out and compare it with MRL.

      The arduino approach is much cheaper than buying the EZB hardware. I think that the MRL can do pretty much most things that the MRL can so its up to you. Of course there are other ways to control the arduinos as well. Very open source.

      Delete
  7. Abdla27 April 2020 at 16:50

    Hi I would like to have your copy of EZB software please,

    AbdullahAlali032@gmail.com

    Thanks!

    ReplyDelete
    Replies
    1. kyle campbell30 April 2020 at 22:32

      Hi Abdullah, I have just emailed it to, any problems let me know

      Delete
  8. Unknown7 July 2020 at 20:39

    Hi Kyle. I recently started building an Inmoov and I'm finding your videos very useful. Could I get a copy of your EZB software please?
    rhfinch@gmail.com

    ReplyDelete
  9. Unknown9 July 2020 at 14:04

    Could I also have a copy of your EZB software Kyle?

    Thanks, Richard Finch. rhfinch@gmail.com

    ReplyDelete
    Replies
    1. kyle campbell14 July 2020 at 12:47

      Hi Richard, just emailed it, sorry for the delay. Hope it helps.

      Delete
  10. Unknown19 January 2022 at 02:35

    Greetings sir, can you send me a copy of your EZB software as well? I just started printing and am going to go the EZB route as well after some trial and error. Thanks in advance!! jharrison0906@gmail.com

    ReplyDelete

Post a Comment